Author - kprokop

ABB Scientists Get a €6,5 million Grant for their Groundbreaking Project

On July 24th 2017 European Commission decided to co-finance research and development project called “NOVUM” which is implemented by a consortium appointed by ABB. Scientists will jointly develop innovative, automated technology for the manufacture of insulation elements for transformers.

The grant agreement was signed on July 12th 2017. The total budget of the project is € 8.5 million, of which 6.5 million comes from the resources allocated by the European Commission. The “NOVUM” project will last for four years and new, automated methods for the manufacture of insulation elements for cellulosic material transformers will be developed. As a result, both cost and time of production will decrease considerably and the amount of waste generated will be reduced by 60%.

Insulating elements […]

5 Tips for Successful PEEK Printing

Because of its unique qualities PEEK is widely used and highly desired in many industries such as medicine, aerospace, oil and gas industry and automotive. It is really successful in small-lot production as well as specialist designs and prototypes where metal processing is exceptionally difficult or even impossible. The filament, however is not easy to handle in a printing process.

1. Control the temperature
It is very important to have adequate thermal management and control over the entire build chamber as PEEK does not react well under temperature fluctuations.
PEEK is high temperature printing material, therefore it can be printed at very high temperatures from 360°C to 450°even. Bear in mind that bed temperature should be 120°C at minimum.

2. Dry the material
It […]

VSHAPER Wins Build Award 2017

The Build Awards are dedicated to uncovering and rewarding the very best in technical innovation, design and service from around the globe. Thanks to a rigorous research and judging processes, only the most deserving firms and individuals are successful in winning those prestigious awards. Build magazine has named VSHAPER as one of the winners in their 3D Printing Awards in Hardware category.

Designed to showcase the top firms when it comes to additive manufacturing and the technology surrounding it, the award has been judged by an in-house awards panel, looking at firms of all scales based on growth, innovation, performance, quality of service, company ethics and approach, and a number of other contributing criteria. VERASHAPE – the producer of VSHAPER […]

VSHAPER PRO Awarded with MTP Gold Medal 2017

The Gold Medal contest and launched in 2012 Gold Medal – Consumers’ Choice is gaining strength and popularity. Each year the jury awards the winners for innovation, creativity and modernity. This year, the jury for Gold Medal Awards, with Prof. Adam Mazurkiewicz from National Research Institute as the head, granted 18 MTP Gold Medals. Among the winners there is the VSHAPER PRO 3D Printer.

Entering the contest are products that are going to be exhibited during the fair which single out with their technological features and quality. Each year, nearly 500 products enter the competition. In the year 2016 alone, there were 444 submissions. Nearly 2500 innovative products entered the contest since 2010.

After the jury verdict for Gold Medal, the […]

HZG Studies Hybrid Structures with 3D Printing Technology

While energy efficiency is becoming the overriding goal of virtually every industrial company, many research institutes are conducting studies into materials and solutions which can help conserve raw materials and energy resources. Among such institutes is the German Helmholtz-Zentrum Geesthacht which is using VSHAPER ONE Pro 3D Printer to analyse metal-polymer hybrid structures.

Helmholtz-Zentrum Geesthacht focuses on development and testing of especially lightweight and advanced engineering materials which when used in industry can considerably improve the effectiveness of energy use in production processes. An overriding goal of the institute is to conserve raw materials and energy resources.

The development of new materials and fabrication techniques has become a matter of success for different industries, such as transportation, medical appliances and civil […]

AM3D Becomes the UK Distributor of VSHAPER 3D Printers

The producer of VSHAPER 3D Printers has partnered with an English company called AM3D. VERASHAPE is continuing to spread with the addition of this new UK partner who is going to distribute the VSHAPER solutions in the UK market.

The VSHAPER team is continuously working on the development of international distribution network. With the cooperation of their European resellers the solutions offered by VERASHAPE are already available in the Dutch, Belgian and Czech markets, among others.
According to analysts, the UK market is growing increasingly fast and it’s been predicted that within the next few years the UK will become one of the biggest consumers of additive technology. Our presence in that market is a monumental step towards the development of […]

VSHAPER Printers Showcased at For Industry Fair in Prague

Between May 9th and 12th 2017, an annual fair of engineering technologies – For Industry will takes place in Prague, Czech Republic. This event aims to create a comprehensive platform for presenting mechanical engineering solutions, demonstrating technological equipment and networking. During this edition, VSHAPER 3D printing solutions will be presented by 3D plus s.r.o.

The FOR INDUSTRY as part of a group of 6 co-located exhibitions called collectively the SPRING SET OF INDUSTRIAL FAIRS serves a unique opportunity for presenting modern manufacturing technologies, progressive technological systems and innovative trends. The event is a traditional place for meetings of top experts, businesspersons and public administration representatives.
During the event we are going to showcase 3 printers by VERASHAPE. We will present the […]

VSHAPER at Hannover Messe 2017

The world’s biggest industrial fair – Hannover Messe will take place between April 24th – 28th  2017. Key industrial solutions, with an extra focus on new technologies supporting production efficiency, are going to be presented during the event. The producer of VSHAPER 3D Printers is going to showcase their solutions, successfully used in automotive, aerospace and foundry.

Hannover Messe is world’s most important event promoting technologies dedicated for industry. The exhibition halls have been divided into different zones such as: Industrial Automation – factory and process automation, systems solutions and industrial IT,  Digital Factory – integrated processes and IT solutions, Energy – integrated energy systems and mobility, Industrial Supply – innovative subcontracting solutions and lightweight construction, Research & Technology – […]

VERASHAPE Nominated for the Title of “Symbol Innowacji 2017”

“Symbol 2017” followed by the name of a specific category is a Polish nationwide promotion program run for 7 years by the editors of “Monitor Rynkowy”, an independent supplement distributed with “Dziennik Gazeta Prawna” and “Monitor Biznesu”, an independent supplement distributed with Rzeczpospolita. The organizers of the program have acknowledged the development of VERASHAPE and nominated the company for the title of “Symbol Innowacji 2017”.

The Symbols are an expression of appreciation of past activities and accomplishments. The program honors those companies and institutions whose brands have become representative and are identified with the industry. The organizers wish to showcase the best symbolic quality of management and action when writing and speaking about a particular business.

The “Symbol” titles will be […]

Request for Quotation – Organizing activities connected with participating in Hannover Messe 2017 fair held on 24.04.2017 – 28.04.2017.

VERASHAPE TOMASZ SZYMAŃSKI in connection with plans for realizing the project called „HANNOVER MESSE BRAMĄ DO EUROPY DLA DRUKAREK 3D VSHAPER” subsidized by the European Union within the framework of OP Smart Growth 2014-2020, Priority III Support for innovation in enterprises, Measure 3.3 Support for promotion and internationalization of innovative enterprises Astana/Hannover, Sub measure 3.3.3: Support for MŚP in promoting product brands – Go to Brand invites offers for organizing activities connected with participating in Hannover Messe 2017 fair held on 24.04.2017 – 28.04.2017.

Zapytanie ofertowe nr 1/3.3.3/HM

Wzór formularza ofertowego – Załącznik nr 1 do zapytania ofertowego

Wzór oświadczenia o braku powiązań osobowych lub kapitałowych pomiędzy Oferentem a Zamawiającym – Załącznik nr 2 do zapytania ofertowego.